Hostacom TRC787Y NATURAL is a thermoplastic polyolefin elastomer compound for injection molding. It is typically used for fully painted automotive interior parts including instrument panels, doors, and consoles. It has an excellent balance of processability, rigidity, and excellent impact strength.
Hostacom TRC787Y NATURAL
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 21 g/10 min |
| Density (23 °C) | 1.03 g/cm³ |
| Flexural Modulus (23 °C) | 1900 MPa |
| Tensile Stress at Yield (23 °C) | 19 MPa |
| Charpy Impact Strength - Notched (23 °C) | 65 kJ/m² |
| Charpy Impact Strength - Notched (-40 °C) | 3.8 kJ/m² |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 103 °C |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Instrument Panels, Interior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications